Home Knurls Cut-Knurls
Cut-Knurls

• Knurls according to DIN 403 for knurlings as DIN82.
• HRc 61±1 standard.
• Standard material: HSS without coating.
• Delivered chamfered or unchamfered, as requested.
• Wide range of different pitches available in stock.
• Any other pitch available upon request.
• Ground faces and central bore.
• Wide range of optional materials and coatings available.

AABL 15ºBR 15ºBL 30ºBR 30º
AAcor BL15cor br15cor1 BL30cor1 BR30cor1

Fine milled teeth

DimensionsStandard pitches
0.30.40.50.60.70.81.01.21.41.51.61.82.02.53.03.54.0
8.9×2.5×4 ok ok ok ok ok ok ok - - - - - - - - - -
10×3×6 0 0 0 0 0 0 0 - - - - - - - - - -
14.5×3×5 - ok ok ok ok ok ok ok - - - - - - - - -
15×4×8 - 0 0 0 0 0 0 0 - - - - - - - - -
21.5×5×8 - ok ok ok ok ok ok ok ok ok ok ok ok - - - -
25×6×8 - ok ok ok ok ok ok ok ok ok ok ok ok - - - -
32×8×14 - - - - - - ok - - ok - - ok - ok - -
32×13×16 - - - - - - 0 - - 0 - - 0 - 0 - -
42×13×16 - - - - - - 0 - - 0 - - - - 0 0 0
42×12×18 - - - - - - ok - - ok - - - - ok ok ok

















Reference: ok  = Permanent stock    0 = Short term delivery   - = not standard


Coatings:
• Without coating (-)
• Titanium nitride, TiN (T)
• Titanium carbonitride, TiCN (C)
• Nitrided (N)
• Titanium nitride and aluminium, TiAlN (A)
• Other...
Materials:
• HSS (-)
• HSS + Co (HC)
• PM (PM)
• PM + Co (PC)
• Other...
Available chamfers:
• Without chamfer (S)
• One side chamfered (E)
• Both sides chamfered (F)










Ordering example for a 25×6×8 size knurl, BL30º teeth pattern, a pitch of 0.8mm and standard angle between teech, without chamfer, manufactured in PM and coated with titanium carbonitride.pedido ingles deformacion



Integi S.A.
Autonomía 5
E-48250 Zaldibar (Bizkaia) España
Tel.: (34) 943 174 800
integi@integi.com
© 2011 Integi S.A.