Home Knurls Form-Knurls
Form-Knurls

• Knurls according to DIN 403 for knurlings as DIN82.
• HRc 61±1 standard.
• Standard material: HSS without coating.
• Delivered chamfered or unchamfered, as requested.
• Wide range of different pitches available in stock.
• Any other pitch available upon request.
• Ground faces and central bore.
• Wide range of optional materials and coatings available.



AABL 30ºBL 45ºBR 30ºBR 45ºGE 30ºGE 45ºKEGV 30ºGV 45ºKV
aadefor bl30def bl45def br30def br45def ge30def ge45def kedef gv30def gv45def kvdef
Fine milled teeth Pattern performed by indentation










DimensionsStandard pitchesDimensionsStandard pitches
0.30.40.50.60.70.81.01.21.51.61.82.00.30.40.50.60.70.81.01.21.51.61.82.0
10×4×4 ok ok ok ok ok ok ok ok - - - - 20×10×6 - ok ok ok ok ok ok ok ok ok ok ok
10×5×4 ok ok ok ok ok ok ok ok - - - - 20×8×6.5 - 0 0 0 0 0 0 0 0 0 0 0
15×4×4 ok ok ok ok ok ok ok ok - - - - 20×10×6.5 - 0 0 0 0 0 0 0 0 0 0 0
15×5×8 ok ok ok ok ok ok ok ok - - - - 25×6×6 - 0 0 0 0 0 0 0 0 0 0 0
15×6×4 ok ok ok ok ok ok ok ok - - - - 25×8×6 - 0 0 0 0 0 0 0 0 0 0 0
15×5×5 0 0 0 0 0 0 0 0 - - - - 25×8×8 - ok ok ok ok ok ok ok ok ok ok ok
15×6×5 0 0 0 0 0 0 0 0 - - - - 25×10×6 - 0 0 0 0 0 0 0 0 0 0 0
15×6×6/11 0 0 0 0 0 0 0 0 - - - - 25×10×8 - ok ok ok ok ok ok ok ok ok ok ok
20×8×6 - ok ok ok ok ok ok ok ok ok ok ok 25×12×8 - ok ok ok ok ok ok ok ok ok ok ok
20×6×6 - ok ok ok ok ok ok ok ok ok ok ok 25×10×15/11 - ok ok ok ok ok ok ok ok ok ok ok
20×8×6/13 - 0 0 0 0 0 0 0 0 0 0 0



















Leyenda:  ok = Permanent stock    o = Short term delivery   - = not standard

Coatings:
• Without coating (-)
• Titanium nitride, TiN (T)
• Titanium carbonitride, TiCN (C)
• Nitrided (N)
• Titanium nitride and aluminium, TiAlN (A)
• Other...
Materials:
• HSS (-)
• HSS + Co (HC)
• PM (PM)
• PM + Co (PC)
• Other...
Available chamfers:
• Without chamfer (S)
• One side chamfered (E)
• Both sides chamfered (F)

















Ordering example for a 25×6×8 size knurl, BL30º teeth pattern, a pitch of 0.8mm and standard angle between teech, without chamfer, manufactured in PM and coated with titanium carbonitride.
pedido ingles_deformacion 



Integi S.A.
Autonomía 5
E-48250 Zaldibar (Bizkaia) España
Tel.: (34) 943 174 800
integi@integi.com
© 2011 Integi S.A.